1. Dear Guest..! Share Your Premium Firmware's Here And Make Money With GsmMarhaba
    Dismiss Notice
  2. Multiple Accounts

    Dont forget we not allowed Multiple Accounts, So all of your accounts as well as your IP will ban..!
    Dismiss Notice
  3. Dear...!! Guest Don't Forget Review Our Rules And Behavior.
    Dismiss Notice

need solution for z14

Discussion in 'QMobile Firmware's' started by waqasafridi, Jan 11, 2017.

  1. waqasafridi

    waqasafridi Member

    Joined:
    Dec 31, 2016
    Messages:
    30
    Thanks Meter:
    5
    Location:
    Mardan KPK Pakistan
    z14 after format hang on logo,,,, when i flash with his own backup file now its dead battery fully charge but still dead ,,,,,,,,,,, i need help any one


    Scatter Load Ok , BaseBand : MT6755 , Project : gionee6755_66_m , Storage : EMMC
    Files found : 16 , Set to Flash : 15
    Created by Infinity-Box (c) Chinese Miracle II (c) 2016
    Device Brand : QMobile
    Device Model : Z14
    Device CPU : MT6755
    Device IntName : Z14
    Device Version : 6.0
    Device Compile : 10/29/2016 5:32:32 AM
    Device Project : GBL7533QM_0203_T5931
    Device ExtInfo : Z14
    Ready to Flash!

    Operation : Flash [ v1.58 ]

    ======= Flash
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 23 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6755
    BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
    BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    DAgent configured successfully
    Connection agent : PRELOADER
    DRAM already initialized by Preloader
    Link with DAgent established
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BM41X
    [eMMC] : FLASH_CID : 150100525831344D42071190D01D83C1
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x0000000747C00000
    [eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
    DEV RID : 0x70D24A4C77D20C3141D0AE385E1720CA
    INT RAM : 0x00000000
    EXT RAM : 0x80000000 [2 GiB]
    [NAND] : FLASH : NOT INSTALLED
    [UFSM] : FLASH : NOT INSTALLED
    [HSUSB] : MODE : HIGH-SPEED
    Boot Ok!

    ScatCFG : BaseBand : MT6755 , Project : gionee6755_66_m , Storage : EMMC
    Setting : Flash Pre-Erase (Safe) : Enabled
    Setting : AFF verify : Enabled
    Setting : HW verify : Enabled

    M67BL : Check eMMC compatibility
    M67BL : eMMC supported by BootLoader!

    Selected forced PMT update
    Build new PMT ...
    Update Primary ...
    Update Mirror ...
    PMT update Ok!

    M67BL : Flash Erase
    Total blocks to Erase : 5
    Erase : 0x0000000000008000-0x0000000001A80000
    Erase : 0x0000000001BC8000-0x0000000004000000
    Erase : 0x0000000007000000-0x0000000000040000
    Erase : 0x0000000007800000-0x0000000002C00000
    Erase : 0x000000000A900000-0x000000073C2FBE00
    Flash Erase Done, time used : 00:00:03

    Processing : Writing all Flash Files
    Flash Partition : PRELOADER
    Flash PLC
    Image Flash Ok
    Flash Partition : RECOVERY
    Image Flash Ok
    Flash Partition : MD1IMG
    Image Flash Ok
    Flash Partition : MD1DSP
    Image Flash Ok
    Flash Partition : MD1ARM7
    Image Flash Ok
    Flash Partition : MD3IMG
    Image Flash Ok
    Flash Partition : LK
    Image Flash Ok
    Flash Partition : LK2
    Image Flash Ok
    Flash Partition : BOOT
    Image Flash Ok
    Flash Partition : LOGO
    Image Flash Ok
    Flash Partition : TEE1
    Image Flash Ok
    Flash Partition : TEE2
    Image Flash Ok
    Flash Partition : SECRO
    Image Flash Ok
    Flash Partition : SYSTEM
    Image Flash Ok
    Flash Partition : CACHE
    Image Flash Ok
    Flash Partition : USERDATA
    Image Flash Ok
    Flash Write Done, time used : 00:02:42


    Done!
    Elapsed: 00:03:00
    Reconnect Power/Cable!
     
  2. qasimgsm

    qasimgsm New Member

    Joined:
    Dec 11, 2016
    Messages:
    12
    Thanks Meter:
    2
    Location:
    sargodha
    Bro try to scan with cm2
     
  3. alhamadmobiles

    alhamadmobiles New Member

    Joined:
    Jan 11, 2017
    Messages:
    2
    Thanks Meter:
    0
    Location:
    pakistan
    cm2 best tool
     
  4. jhefjhef17

    jhefjhef17 New Member

    Joined:
    Jan 13, 2017
    Messages:
    17
    Thanks Meter:
    1
    Location:
    Phillipines
    try another firmware for cm2 bro
     
  5. KHOKHARx

    KHOKHARx Member

    Joined:
    Nov 8, 2016
    Messages:
    77
    Thanks Meter:
    20
    Location:
    UNKNOWN
    THIS IS NOT FIRMWARE PROBLEM DUDE .............I HAVE ALSO THIS PROBLEM................
     
  6. waqasafridi

    waqasafridi Member

    Joined:
    Dec 31, 2016
    Messages:
    30
    Thanks Meter:
    5
    Location:
    Mardan KPK Pakistan
    yes this is not firmware option ,,,,, this firmware is his own firmware and nor it is done with cm2 ,,,,,,,
     
  7. KHOKHARx

    KHOKHARx Member

    Joined:
    Nov 8, 2016
    Messages:
    77
    Thanks Meter:
    20
    Location:
    UNKNOWN
    do you have miracle bin firmware............
     
  8. KHOKHARx

    KHOKHARx Member

    Joined:
    Nov 8, 2016
    Messages:
    77
    Thanks Meter:
    20
    Location:
    UNKNOWN
    TRY THIS AFTER RESULT OTHERWISE YOU NEED ONLY WORKING PHONE MIRACLE FULL DUMP FIRMWARE
    DOWNLOAD LINK
     
  9. waqasafridi

    waqasafridi Member

    Joined:
    Dec 31, 2016
    Messages:
    30
    Thanks Meter:
    5
    Location:
    Mardan KPK Pakistan

    thanks for link i will download this ..... wil you told to me how to read full dump firmware ??????
     
  10. KHOKHARx

    KHOKHARx Member

    Joined:
    Nov 8, 2016
    Messages:
    77
    Thanks Meter:
    20
    Location:
    UNKNOWN
    1 alive z14
    make full dump backup
    bin file.
     
    waqasafridi likes this.
  11. waqasafridi

    waqasafridi Member

    Joined:
    Dec 31, 2016
    Messages:
    30
    Thanks Meter:
    5
    Location:
    Mardan KPK Pakistan
    how you did ,,, plz i need a perfect solution,,,, how you read full dump file ????
     

Share This Page